|
|
|
|
|
|
HomeHome & GardenKitchenCook's Tools & GadgetsXANTREX PROSINE REMOTE PANEL INTERFACE KIT FOR 1000 & 1800 |
|
|  |
| Customer Reviews: | | Average Customer Review: ( 5 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
2 of 2 found the following review helpful:
 Xantrex Interface Panel -- Not LCD Panel Nov 11, 2010
By chocolate leaf
This item is the interface panel which allows you to remotely mount the LCD display panel from your Xantrex PROsine 1000 and 1800. You unscrew the LCD display from the front of your PROsine unit, disconnect the cable from the back of it and plug the cable into the back of the interface panel. Then plug in the included telephone cable into the front of the interface cable, route that cable to the desired remote mounting location of the LCD display panel, and plug it into the back of the LCD display panel. Mount the LCD display panel in the new location and you're good to go.
The picture currently displaying this interface panel is accurate. The product description from the manufacturer is accurate. The product features description listed by Amazon "Remote LCD display, displays battery voltage, amp draw and fault conditions" is inaccurate, and should be revised by Amazon.
Other than the somewhat misleading listing, this is a great product. It works as advertised. Although it seems a little pricey for what it is, I'm happy that Xantrex designed the unit so you can use the inverter's LCD display in a more useful remote location, and not have to buy a redundant, more expensive remote like some other manufacturers do. Some of their remote displays cost $100-300. And it does include 30 feet of telephone cable.
1 of 1 found the following review helpful:
 Interface panel not needed... Nov 06, 2011
By Deborah A Smith
This expensive panel although would do the job it is simply not needed.If you are remotely mounting the inverter like i did i just used a telephone line coupler(just a few dollars)to connect the inverter to your LCD panel via telephone cable. Happy inverting!!
It is exactly what they say it is... Apr 20, 2010
By Scott H
"Scott H"
This product is exactly what they say it is. It is not the remote display with the fancy LCD that is already included in your Xantrex inverter, it is the panel that installs on your inverter when you are moving your display panel to a remote location.
 Wrong part not once but twice Aug 20, 2009
By jw
Amazon sent me the wrong part overnight two days in a row. The part does not match the picture. There is no LED or even close to the same part.The part they sent has a phone line and an on /off button only. The rep said after the second call he would send out the right one and it was wrong again. Then the rep never called me back after he said he would !!!
0 of 1 found the following review helpful:
Shipped item NOT the item in photo, no display, only an LED May 09, 2009
By S. Trent
The unit I received only has a switch and green LED, no LCD for battery voltage display, no amps display, no power display. I thought I must have ordered the wrong item and check to see if it worked with my PS1800. It worked but when I checked my order, it was for the unit with full display! So this one is going back.
|
| | |
|
|
|
|
|
