|
|
|
|
|
|
HomeElectronicsAccessories & SuppliesComputer AccessoriesMAXELL 648720 - CDRPW100PKS PRINTABLE CD-R (100-CT, SPINDLE); |
|
|  |
| Customer Reviews: | | Average Customer Review: ( 26 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
17 of 17 found the following review helpful:
Good quality discs; white printable, but not hub-printable Sep 13, 2007
By Charlie Howard
The 16 discs I've burned & printed so far all worked very well, no problems at all. And, they have a white printable area, which gives much nicer results than the silver-printable variety.
These have standard (40mm) non-printable centers. Had I given it more thought, I'd have ordered "hub-printable" discs instead, which have smaller (20mm) non-printable centers and permit the creation of nicer, more professional-looking labels. Of course, I don't know whether such discs would be as reliable as the Maxells or show the printing as well as these do.
9 of 9 found the following review helpful:
Fair value for the money Mar 19, 2007
By Richard R. Green
The price I paid for this spindle of CD-R's was pretty good and have not had a problem yet. The only price that I have seen that beats this one was Staples running a sale of 50 for $10, but I have yet to use the stock that I bought as I still have about 25 left on the spindle. If you don't want to wait for their sale, this is an excellent bargain. The print surface has done very well with the inks from my Epson Photo R-220.
7 of 7 found the following review helpful:
 Recording issues Sep 01, 2008
By Peter Freund
In duplicating music CD's with a robot duplicator, there was a very high reject rate, averaging 10 to 15% on 3 packs of 100. When I switched back to Taiyo Yuden CD's, there were no rejects. The price of the Maxell CD's was a little lower than Taiyo Yuden, but in the end they were more expensive because of the high reject rate.
4 of 4 found the following review helpful:
 Excellent blanks, no problems here Jul 12, 2008
By pepeVision
I've printed and burned a spindle with no coasters. You can print all the way to the inner hub (my replicator is set for a 25mm hub) and it works aces. Great product.
2 of 2 found the following review helpful:
Great Recording and Great Printing May 04, 2011
By G. Max Gooding
These are low cost but high performance CD-Rs. The packaging is adequate. Sometimes the spindle can crack away at the base when so many CD-Rs are packed unto it. Forutnately, these were fine. The ink from my Disc Painter adheres wells to the surface. However for best results, you should allow the ink to dry properly before attemping to use the CDs.
The under-side of these discs are silver with only the slightest tinge of green on them. The hub of these CD-Rs are clear apart from "Maxell" that is screen printed unto them.
I think that this is a fine choice if you use blank CD-Rs on a regular basis and want to give them a professional printed look.
See all 26 customer reviews on Amazon.com
|
| | |
|
|
|
|
|
