|
|
|
|
|
|
HomeElectronicsOffice ElectronicsScannersFlatbed |
|
|  |
| Customer Reviews: | | Average Customer Review: ( 6 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
13 of 15 found the following review helpful:
 Misleading Specs Jan 27, 2003
This scanner is faster & quieter than the similar HP product I tried. HOWEVER, it does NOT scan at 42 bit color or 600 x 1200 dpi using the Paperport software provided. Visioneer tech support said I needed to use Adobe Photoshop (not included, of course) to scan. I tried that and it still scanned at 24 bits and 600 x 600 dpi. After 3 calls & 1 email, Visioneer finally told me that it won't scan at the advertised levels with the Paperport software and that I needed to buy new software and/or consult another vender's tech support if I wanted to scan at 42 bit/600 x 1200!! It doesn't measure up with their provided software or even the gold-standard Photoshop 7. UNBELIEVABLE!!
9 of 10 found the following review helpful:
 customer support Dec 30, 2003
By Larry McKinnon
I purchased this scanner, and it worked fine until one day the document feeder stopped working. For a few months I thought It was something I was doing, and worked around it. I finally called tech support, and was told I was out of warranty. Said ok, I will pay to get my ADF fixed. They do not fix anything. If you are out of warranty, you are stuck. Connected to Customer support, same thing. Can you imagine buying a car, and after a year, the tranny went bad, you were told you have to buy a new car because they do not fix cars over a year old. This is the type of company that has made us a disposable society. How can you charge $600.00 dollars, then when it breaks, tell the people to buy a new one. Something stinks with this logic.
Larry McKinnon
5 of 5 found the following review helpful:
Poor software, cannot run as limited user Mar 14, 2006
By Daniel Carter
I have had no hardware problems with the two 9650s I have in the office, but the software bundled with this scanner is terrible (at least on XP). (1) There's a broken online registration stage during the install, which wants you to register but then can't connect to the server; (2) possibly related to 1, the scanner is not detected when you are asked to plug the USB cable in, despite what the docs say - you just have to click finish and hope it is detected after reboot; (3) DO NOT EVEN ATTEMPT to set this thing up for a limited user. Textbridge won't work. You need to be at least a power user. Even then, you have to make sure you run every piece of software in the bundle, especially ScanDirect, first, as admin, before you can do so as power user. (4) other fun problems with this software include the mysterious presence of two Visioneer TWAIN drivers in every 'select scanner' list, only one of which works, a weird problem where all scans from within Acrobat 7 came out inverted (white on black) after running the TextBridge setup utility, the TWAIN interface previewing fine, but refusing to scan, the TWAIN interface ignoring what you set as paper source (flatbed or ADF) and color/bw settings and doing whatever it wants, with no recourse. I have reinstalled this entire package once on for one of the scanners, and three times for the other.
I have been doing IT support work for over 5 years, and consider myself reasonably competent. I acknowledge that most of these problems probably originate in trying to run this software as a non-administrator (although obviously I installed them as admin) but come on, this is hardly an unusual situation. Stay away from this thing.
3 of 3 found the following review helpful:
 Save money and buy Xerox 510 Jun 01, 2004
This is a decent scanner with respectible specification. It works as well as comparible scanners on the market and includes a good software bundle. But do yourself a favor and buy the Xerox Documate 510 if you like this scanner. It is the exact same hardward/software bundle with a different name on the front for almost half the cost.
2 of 2 found the following review helpful:
Broke down after 3 months Aug 17, 2004
By M. Luu
"SuperUser"
The ADF motor burned up and melted the plastic after 3 months. After numerous aggravated phone calls to visioneer tech support, they sent a replacement that is a refurbished one. The light on the refurbished model now takes a whole 1 minute to warm up. So I'm sick of calling into visioneer tech, went out and bought a fujitsu scanner, more expensive but much better quality.
See all 6 customer reviews on Amazon.com
|
| | |
|
|
|
|
|
